View STGW19NC60WD_4121568.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STGW19NC60WD STGP19NC60WD
N-channel 600V - 19A - TO-220 - TO-247 Ultra fast PowerMESHTM IGBT
Features
Type STGP19NC60WD STGW19NC60WD

VCES 600V 600V
IC @100C (max)@25C < 2.5V < 2.5V 22A 23A
3 1 2
VCE(sat)
High frequency operation Low CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode
TO-220
TO-247
Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "W" identifies a family optimized for very high frequency application.
Internal schematic diagram
Applications

High frequency motor controls, inverters, UPS HF, SMPS and PFC in both hard switch and resonant topologies
Order code
Part number STGP19NC60WD STGW19NC60WD Marking GP19NC60WD GW19NC60WD Package TO-220 TO-247 Packaging Tube Tube
May 2007
Rev 3
1/15
www.st.com 15
Contents
STGP19NC60WD - STGW19NC60WD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 7
3 4 5
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/15
STGP19NC60WD - STGW19NC60WD
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VCES IC(1) IC(1) ICL (2) IF VGE PTOT Tstg Tj
Absolute maximum ratings
Value Parameter TO-220 Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Diode RMS forward current at TC = 25C Gate-emitter voltage Total dissipation at TC = 25C Storage temperature - 55 to 150 Operating junction temperature C 40 22 35 12 20 125 600 42 23 TO-247 V A A A A V W Unit
1. Calculated according to the iterative formula:
T -T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C
2. Vclamp=480V, Tj=150C, RG=10, VGE=15V
Table 2.
Symbol
Thermal resistance
Value Parameter TO-220 Thermal resistance junction-case max 1 2.25 62.5 TO-247 0.95 2.5 C/W C/W C/W Unit
Rthj-case Thermal resistance junction-case max diode Rthj-amb Thermal resistance junction-ambient max
3/15
Electrical characteristics
STGP19NC60WD - STGW19NC60WD
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs
Static
Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 2.1 1.8 3.75 2.5 Typ. Max. Unit V V V V A mA nA S
Collector-emitter saturation VGE= 15V, IC= 12A voltage VGE= 15V, IC=12A,Tc=125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 A VCE= Max rating,TC= 25C VCE= Max rating,TC= 125C VGE= 20V, VCE= 0 VCE = 15V, IC= 12A
5.75 150 1 100 10
Table 4.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, Figure 16 Min. Typ. 1180 130 26 53 10 21 Max. Unit pF pF pF nC nC nC
4/15
STGP19NC60WD - STGW19NC60WD
Electrical characteristics
Table 5.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390V, IC = 12A , RG= 10 VGE= 15V, Figure 17 VCC = 390V, IC = 12A , RG= 10 VGE= 15V, Tj = 125C Figure 17 VCC = 390V, IC = 12A RG= 10 VGE= 15V, , Figure 17 VCC = 390V, IC = 12A , RG= 10 VGE= 15V, Tj = 125C Figure 17 Min. Typ. 25 7 1600 25 8 1400 22 90 43 47 127 77 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Table 6.
Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 12A , RG= 10 VGE= 15V, Figure 17 VCC = 390V, IC = 12A RG= 10 VGE= 15V, , Tj = 125C Figure 17 Min. Typ. 81 125 206 161 255 416 Max. Unit J J J J J J
1. Eon is the turn-on losses when a typical diode is used in the test circuit in Figure 15 If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current
5/15
Electrical characteristics
STGP19NC60WD - STGW19NC60WD
Table 7.
Symbol Vf trr Qrr Irrm trr Qrr Irrm
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 12A If = 12A, Tj = 125C If = 12A,VR = 50V, Tj = 25C, di/dt = 100 A/s Figure 18 If = 12A,VR = 50V, Tj =125C, di/dt = 100A/s Figure 18 Min. Typ. 1.9 1.5 31 30 2 59 102 4 Max. 2.5 Unit V V ns nC A ns nC A
6/15
STGP19NC60WD - STGW19NC60WD
Electrical characteristics
2.1
Figure 1.
Electrical characteristics (curves)
Output characteristics Figure 2. Transfer characteristics
Figure 3.
Transconductance
Figure 4.
Collector-emitter on voltage vs temperature
Figure 5.
Gate charge vs gate-source voltage Figure 6.
Capacitance variations
7/15
Electrical characteristics Figure 7. Normalized gate threshold voltage vs temperature Figure 8.
STGP19NC60WD - STGW19NC60WD Collector-emitter on voltage vs collector current
Figure 9.
Normalized breakdown voltage vs temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current
8/15
STGP19NC60WD - STGW19NC60WD Figure 13. Turn-off SOA
Electrical characteristics Figure 14. Emitter-collector diode characteristics
9/15
Test circuit
STGP19NC60WD - STGW19NC60WD
3
Test circuit
Figure 16. Gate charge test circuit
Figure 15. Test circuit for inductive load switching
Figure 17. Switching waveform
Figure 18. Diode recovery time waveform
10/15
STGP19NC60WD - STGW19NC60WD
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
11/15
Package mechanical data
STGP19NC60WD - STGW19NC60WD
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
12/15
STGP19NC60WD - STGW19NC60WD
Package mechanical data
TO-247 MECHANICAL DATA
mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620
DIM. A A1 b b1 b2 c D E e L L1 L2 oP oR S
13/15
Revision history
STGP19NC60WD - STGW19NC60WD
5
Revision history
Table 8.
Date 04-Oct-2006 13-Apr-2007 08-May-2007
Revision history
Revision 1 2 3 Initial release. Final version Added TO-247 Changes
14/15
STGP19NC60WD - STGW19NC60WD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
15/15

▲Up To Search▲

Price & Availability of STGW19NC60WD

	To Download STGW19NC60WD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .